新聞
聯系方式
服務熱線：0531-85980985
聯系人： 寧經理 手機：13953116782 電話：15990999232 郵箱：499589624@qq.com 地址：濟南市槐蔭區清河北路11號（美里新居南門斜對面）亞德森工廠店
工作服定制的量體知識有哪些？
來源：http://www.justinbieberconcerttickets.com 日期：2023-07-11 發布人：
1.總長：代表服裝“號”，由頭部頂端垂直測量腳跟。
1. Total length: represents the clothing size, measured vertically from the top of the head to the heel.
2.衣長：由前身左側脖根位置，軟尺通過胸部豐滿處弧形測量長度，一般要看工作服定制款式特點來定。
2. Length: Measure the length from the left neck base of the front body, using a soft ruler to measure the length through the curved area of the full chest. It usually depends on the customized style characteristics of the work clothes.
3.袖長：由左肩骨外端頂點量手的虎口位置，不宜過短也不宜過長。
3. Sleeve length: Measure from the outer vertex of the left shoulder bone to the mouth of the hand, and should not be too short or too long.
4.肩寬：由左肩骨外端頂點量右肩骨外端頂點，軟尺在后背貼緊后脖根略成弧形。
4. Shoulder width: Measure from the vertex of the outer end of the left shoulder bone to the vertex of the outer end of the right shoulder bone, and place the soft ruler tightly against the back of the neck in a slightly curved shape.
5.胸圍：將皮尺放在胸部更豐滿位置頂點水平環繞一周。
5. Chest circumference: Place the tape measure at the fullest position of the chest and wrap it horizontally around the apex.
6.腰圍：將皮尺放在腰部更細位置水平環繞一周。
6. Waist circumference: Place the tape measure horizontally around the thinnest part of the waist.
7.腰節：一般體型可按總體高度比例算出。遇到特殊體型時，就需要測量這前后腰節尺寸，即將皮尺放在腰部更細處水平環繞一周，自頸圍前后點量到前后腰圍皮尺的中間尺寸，即為前后腰節的尺寸。
7. Waist joint: Generally, the body shape can be calculated in proportion to the overall height. When encountering a special body shape, it is necessary to measure the size of the front and rear lumbar joints. That is, place the tape measure horizontally around the thinnest part of the waist and measure it from the center point of the neck circumference to the middle size of the front and rear lumbar measurement, which is the size of the front and rear lumbar joints.
8.臀圍：將皮尺放在臀部更豐滿位置頂點水平環繞一周。
8. Hip circumference: Place the tape measure at the fullest position of the buttocks and wrap it horizontally around the vertex.
工作服定制測量時，為了保持服裝定做尺寸的準確性，被測量者更好穿簡單或較薄的衣服，抬頭挺胸站直，雙手自然下垂，測量圍度時，皮尺應保持垂直。
When customizing work clothes for measurement, in order to maintain the accuracy of the customized size of the clothing, it is best for the measured person to wear simple or thin clothes, stand straight with their head up and chest straight, and their hands naturally droop. When measuring the circumference, the tape measure should be kept vertical.
上一條：工作服設計定制需要關注的要素 | 下一條：不同職業男裝搭配技巧有哪些？
資訊MORE+
- 濟南服裝廠避坑！防酸堿防護服測試誤區揭秘，90% 企業都在用錯方法，3 步合規檢測全解析 2026-04-13
- 濟南職業裝避坑！鋼廠一線款硬核選型，普通全棉=致命隱患，5大標準一鍵達標 2026-04-08
- 濟南工作服采購避坑！4個必問賣家的問題，少問一個就可能白花冤枉錢，90%企業都踩過 2026-04-07
- 濟南工裝定做避雷：全棉工作服不是款！這6類崗位嚴禁穿，出事悔晚 2026-04-06
- 濟南服裝廠｜液化氣站工裝避坑：防靜電不達標，穿了等于裸奔 2026-03-27
- 濟南職業裝|鋼廠勞保采購避坑：帽+阻燃服雙達標，少一項都是拿冒險 2026-03-26
- 濟南工作服：警惕阻燃服亂買等于裸奔，鋼廠焊接款B級阻燃才保命 2026-03-26
- 濟南服裝廠揭秘：別被水洗標騙了！成分造假、國標亂標，工裝水太深 2026-03-25
- 濟南職業裝定制：夜班高危作業專屬，防靜電連體服，把穿在身上 2026-03-25
- 濟南工裝定做｜國標防靜電連體服，防護拉滿，特殊行業作業零隱患 2026-03-24
- 濟南工作服避坑指南：30年老店實話實說，別再買穿幾天就廢的工裝 2026-03-24
- 濟南服裝廠：防靜電抗油棉服，加油站/化工行業剛需，一件穿過冬 2026-03-23
- 濟南冬季工作服別亂選！加厚保暖+實用耐穿，戶外抗凍不將就 2026-03-23
- 別再誤解工作服定制！加個logo不算定制，全流程專屬打造才是核心 2026-03-13
- 濟南服裝廠定制工作服：別再發“塑料布”工服，體面耐穿才是對工人的尊重 2026-03-12
- 加油站防靜電濟南工作服怎么選？6個核心要求，選對耐用又合規 2026-03-12
- 濟南工作服生產廠家實用選型與生產細節 2026-03-06
- 濟南工作服訂做：不同類型的面料如何洗滌保養？ 2026-03-05
- 濟南工作服定做：告別千篇一律，定制專屬企業風采與員工格調 2026-03-04
- 定制的無菌潔凈工作服要如何？ 2026-02-23
